View NUF8010MU_4132336.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NUF8010MU Low Capacitance 8 Line EMI Filter with ESD Protection in UDFN Package
This device is an 8 line EMI filter array for wireless applications. Greater than -20 dB typical attenuation is obtained at frequencies from 800 MHz to 5.0 GHz. The NUF8010MU has a typical cut-off frequency of 215 MHz. This UDFN package is specifically designed to enhance EMI filtering for low-profile or slim design electronics especially where space and height is a premium. It also offers ESD protection-clamping transients from static discharges. ESD protection is provided across all capacitors.
Features http://onsemi.com
1 Cd 2 Cd 3 Cd 4 Cd 5 Cd 6 Cd 7 Cd 8 Cd Cd Cd 9 Cd 10 Cd 11 Cd 12 Cd 13 Cd 14 Cd 15 16
* * * * * * *
EMI Filtering and ESD Protection Integration of 40 Discrete Components Compliance with IEC61000-4-2 (Level 4) UDFN Package, 1.2 x 3.5 mm, 0.4 mm Pitch Moisture Sensitivity Level 1 ESD Ratings: Machine Model = C Human Body Model = 3B This is a Pb-Free Device*
Benefits
* Reduces EMI/RFI Emissions on a Data Line * Low Profile Package; Typical Height of 0.5 mm * Design-Friendly and Easy-to-Use Pin Configurations, * * * * * * * * *
Particularly for Portable Electronics Integrated Solution Offers Cost and Space Savings in UDFN Package Reduces Parasitic Inductances Which Offer a More "Ideal" Low Pass Filter Response Integrated Solution Improves System Reliability
(Top View)
16 1 UDFN16 MU SUFFIX CASE 517AF 810 M G
MARKING DIAGRAM
810 M G 1
Applications
EMI Filtering and ESD Protection for Data Lines Keypad Interface and Protection for Portable Electronics Bottom Connector Interface for Mobile Handsets Notebook Computers and Digital Cameras LCD Display Interface in Mobile Handsets Camera Display Interface in Mobile Handsets
= Specific Device Code = Date and Assembly Location = Pb-Free Package
ORDERING INFORMATION
Device NUF8010MUT2G *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Package UDFN16 (Pb-Free) Shipping 3000 / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: NUF8010MU/D
(c) Semiconductor Components Industries, LLC, 2007
1
October, 2007 - Rev. 0
NUF8010MU
MAXIMUM RATINGS
Parameter ESD Discharge IEC61000-4-2 Contact Discharge Operating Temperature Range Storage Temperature Range Maximum Lead Temperature for Soldering Purposes (1.8 in from case for 10 seconds) TOP TSTG TL Symbol VPP 8.0 -40 to 85 -55 to 150 260 C C C Value Unit kV
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted)
Parameter Maximum Reverse Working Voltage Breakdown Voltage Leakage Current Resistance Capacitance (Notes 1 and 2) Cut-Off Frequency (Note 3) Symbol VRWM VBR IR RA Cd f3dB Above this frequency, appreciable attenuation occurs IR = 1.0 mA VRWM = 3.3 V IR = 20 mA 85 100 7.0 215 6.0 7.0 Test Conditions Min Typ Max 5.0 8.0 100 115 11 Unit V V nA W pF MHz
1. Measured at 25C, VR = 2.5 V, f = 1.0 MHz. 2. Total Line Capacitance is 2 times the Diode Capacitance (Cd). 3. 50 W source and 50 W load termination.
http://onsemi.com
2
NUF8010MU
TYPICAL PERFORMANCE CURVES (TA= 25C unless otherwise specified)
0 -5 -10 -15 S21 (dB) S41 (dB) 1.E+07 1.E+08 1.E+09 FREQUENCY (Hz) 1.E+10 -20 -25 -30 -35 -40 -45 -50 1.E+06 -60 -70 1.E+06 -20 -30 -40 -50 0 -10
1.E+07
1.E+08 1.E+09 FREQUENCY (Hz)
1.E+
Figure 1. Typical Insertion Loss Characteristic
Figure 2. Typical Analog Crosstalk
2 NORMALIZED CAPACITANCE
1.05
1.5 RESISTANCE (W) 0 1 2 3 4 5
1.025
1
1
0.5
0.975
0 REVERSE VOLTAGE (V)
0.95 -40
-20
0
20
40
60
80
TEMPERATURE (C)
Figure 3. Typical Capacitance vs. Reverse Biased Voltage (Normalized Capacitance Cd at 2.5 V)
Figure 4. Typical Resistance over Temperature
http://onsemi.com
3
NUF8010MU
PACKAGE DIMENSIONS
UDFN16, 3.5x1.2, 0.4P CASE 517AF-01 ISSUE B
D
2X
0.10 C
2X
0.10 C
0.10 C
16X
0.08 C SIDE VIEW D2
16X
L
16X
K
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
EEEE EEEE
1 16
PIN ONE REFERENCE
E
A1
TOP VIEW
DETAIL A
(A3)
A
SEATING PLANE
A1
14X
C
e
8
E2 1
9
16X
BOTTOM VIEW
b 0.10 C A B 0.05 C
NOTE 3
http://onsemi.com
4
EE CC EE
A B
A3
DETAIL A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.25 AND 0.30 mm FROM TERMINAL. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. DIM A A1 A3 b D D2 E E2 e K L MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.00 0.03 0.05 0.127 REF 0.15 0.20 0.25 3.50 BSC 2.70 2.80 2.90 1.20 BSC 0.20 0.30 0.40 0.40 BSC 0.20 ----0.20 0.25 0.30
SOLDERING FOOTPRINT*
1.35 0.35
0.30 0.10 2.85
15X
0.40 PITCH
0.20
16X
0.32
DIMENSIONS: MILLIMETERS
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
NUF8010MU/D

▲Up To Search▲

Price & Availability of NUF8010MU

	To Download NUF8010MU Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .